5 ways to install LED strips

How to install LED light strips? You can try the following five methods.

1, four-line LED lights with a total of four wires, three rows of lights (note that not four rows of lights), each row of 1 meter 24 lights, 24 & TImes; 3 = 72. Since the power of each lamp bead is 0.05W, the power of the 72-bead LED strip is: 72 & TImes; 0.05 = 3.6W.

2. The four-wire LED lamp has a bandwidth of about 22 mm, a thickness of about 8 mm, and a component of about 0.25 kg/m (4 m-kilogram).

3. Each LED light strip must be equipped with a special plug (plug with transformer); when connecting, it is necessary to remove the clear plastic cover, and then cover the test light. Can not be directly connected with a cover, so easy to short circuit!

4, there is a "hinged cut" mark per meter, can only be cut in the mark, cut or wrong will lead to one meter is not bright! Some will be biased by the sign, it is best to carefully look at the status of the sign before the cut, according to the local cut off the center can not be connected. You can see it with care.

5. When the LED light strip device is installed, it is usually placed in the light trough, and it can be straightened. It can also be fixed with a string or a thin wire. For exterior or vertical installation, separate clips and tail plugs are required. The original clip is fully illuminating. It is best to put waterproof glass glue on the tail plug and plug after loading, so that the waterproof performance will be better.

KCC Certificate Extension Sockets

England Power Socket,Silver Wall Sockets,Wall Switches And Sockets,Wall Socket With Usb Charging Ports

Heikki Technology Co., Ltd. , https://www.heikkipower.com