Marvell first launches samples for automakers
With the development of high-speed LTE networks and autonomous driving technologies, automotive companies are working to create a construction method for high-speed data distribution between cars and cars. Today, Gigabit Ethernet is available through a simple copper twisted pair, paving the way for the automotive industry to achieve high-speed networking performance in the car. In November 2015, Marvell introduced samples based on the IEEE 1000BASE-T1 pre-standard specification to verify in-vehicle application performance. The 1000BASE-T1 standard enables high-speed bidirectional data transmission in lightweight, low-cost, single- and dual-cable devices, which helps automotive companies create new automotive performance and benefits. Early samples from Marvell helped automakers evaluate the performance of this new standard and identify potential problems early in the application development process prior to formal production to accelerate time to market.
Industry standards bodies paved the way for seamless car wireless communications
At the same time, many industry standards bodies are researching standards for automotive wireless to enable seamless automotive internal and external communications to operate cloud-based applications. The LTE standard delivers data performance in excess of 100 Mbps. LTE connectivity requires high-speed network connectivity in line with 100BASE-T1 or 1000BASE-T1 Ethernet performance based on the actual network throughput that users get from the network. As carrier network coverage and data billing rates are accepted by consumers, cloud-based applications in the car will bring a lot of data transmission, which will not only bring more entertainment information programs, but also provide concierge and Applications such as navigation and remote diagnostics via secure over-the-air transmission (think, if you have a problem with your car on the way to your vacation, you will know what's going on right away.) Question, is this not very good?). Such a mechanism will promote safety and speed up fleet management in commercial enterprises to help reduce maintenance costs while providing drivers with timely cloud data services to improve customer satisfaction.
Many first time in history
Marvell is actively involved in the IEEE (Institute of Electrical and Electronics Engineers) standard development process. Marvell played a key role in the 2011 IEEE's intention to collect specific Gigabit Ethernet physical layer protocols for the automotive industry. This intention collection received unanimous support (this is rarely the case with IEEE) and the new IEEE 802.1bp standard was approved in 2016. At the same time, Marvell has sampled and tested pre-standard components in the industry. The availability of these components has demonstrated outstanding features and dynamism in the test, and the development of new applications for high-speed Ethernet.
Will the automotive industry become the largest employer in the IT industry in the near future?
Gigabit Ethernet for the automotive industry can support enhanced connectivity applications. The automotive industry is rapidly adopting Ethernet as its business engine, not only because of its superior price/performance ratio, but also because it supports the Open Interconnect System (OSI) model. Open interconnect systems enable rapid deployment of applications and services, using this layered approach—a specific physical layering protocol technology that meets both lightweight and low electromagnetic compatibility (EMC) requirements and must be developed to work with all existing The upper layers of the Open Interconnect System model remain consistent, which enables the use and reuse of existing development layers above the level of physical layering protocols. With the unprecedented expansion and application potential of automotive connections, the automotive industry may become the largest employer in the IT industry in the next few years.
Future is worth looking forward to
In addition to providing automotive Wi-Fi and Bluetooth combo products, Marvell makes Wi-Fi technology part of the external connection by developing 802.11ai technology that allows for fast initial link setup, allowing high-speed vehicles to be used when the base station is available. The connection. In addition, 802.11p products provide short-range wireless connectivity for collision avoidance and pedestrian/bicycle detection, which requires applications to respond quickly and is not possible with existing Lidar (LIDAR) and local thermal balance (LTE) technologies. The wireless technology set on the roof allows Ethernet to play an important role in the communication function of vehicles at high speeds. By delivering early samples based on the latest industry development standards, Marvell is driving new applications for automotive connectivity technology.
Led Photo Clip Remote String Lights, 100 LEDs Fairy Twinkle String Lights, Wedding Party Home Decor Lights for Hanging Photos, Cards and Artwork (44 Feet, Warm White) DECORATE ANYWHERE - Portable string lights with infinite possibilities. It can be used outdoors, just be sure to protect the USB cord/port from rain/snow/etc. if you choose to put the lights outdoors. This is a SIMPLE AND ELEGANT way to take your room to the next level. This is the PERFECT GIFT for your friends and family that. Give the most creative and functional gift this year! PACKAGE (whats in the box) - 44 feet light string including 100 LED lights -USB Cable -100 transparent clips -12 wall hooks
Christmas String Lights,String Lights With Clips,Led Photo Clip String Lights,Led Clip String Light
XINGYONG XMAS OPTICAL (DONGGUAN ) CO., LTD , https://www.xingyongxmas.com