1. Realize product serialization, integration and intelligence
Figure: The premise of serialization is modularization, the characteristics of LED point light source, so that it can be combined into various shapes to adapt to various lamps. The modular design provides the convenience that traditional light sources can't reach, but At the same time, it also puts forward higher requirements for optical light distribution design.
Traditional lamps used in indoor lighting can be described as a wide range of names. Downlights, spotlights, grille lights, lanterns and chandeliers form the two major areas of commercial lighting and home lighting, which dominate the direction of indoor lighting, and are currently used in indoor lighting. LED products are mainly decorative lighting fixtures such as LED cup lamps and LED floor tiles. Other common traditional lamps rarely use LED light sources. However, the huge potential of this market is undoubted. With the improvement of LED light efficiency and price reduction, Whoever first developed a series of products, whoever seized the market opportunity.
Figure: Due to the electrical characteristics of LEDs, it is easy to be controlled. However, in indoor applications, "intelligent control" is still a pseudo-proposition that replaces the title of "integrated control" with all manual controls. Real Intelligent lighting is still vacant, it is an opportunity, it is also a huge pit.
One of the biggest advantages of LEDs is their ease of control. Cluster control and may, in some instances require programmability, LED intelligent products can provide a range of solutions, containing a three-color LED lamps and LED lamps with intelligent microprocessor products, can be arranged DMX512 protocol Running on Ethernet, this provides convenience for the intelligent management of indoor lighting, and can also dilute the disadvantage of the initial cost of using LED lighting fixtures.
2, product humanization
Lighting , after a series of evolutions, is slowly becoming a fashion, humanized lighting products have become the first choice, and LED lighting fixtures are small, unlike traditional light sources with glass bulbs, and light is easy to control In the humanized design of the appearance of the lamp, the LED lamp manufacturer is given unlimited space.
Figure: Due to the non-continuous spectral characteristics of LEDs, light quality is the most easily overlooked by ordinary consumers. Unless it is measured by professional instruments such as “lighting passportsâ€, it is difficult for ordinary people to judge with the naked eye. This is also the conscience of LED companies. "Like the mirror."
3. Improve the utilization of luminous flux and minimize the overall lighting cost
Although the LED light source is not as efficient as some conventional light sources, the LED light source has high directionality and high availability. Therefore, as long as the optical flux is maximized by reasonable optical processing, the LED can fully achieve the function in terms of illumination. Lighting requirements.
Figure: The chip is important, but the lens and reflector are the soul of the luminaire. In addition to the same electrical index, optical design is the decisive level to achieve the best.
The illuminance of the 3W LED and the 35W halogen lamp cup was tested under the same conditions. Within 3 meters, the center illumination of the LED light source is much higher than that of the halogen lamp cup. In practical applications, the common illumination range of the lamp cup is 1-3 meters, and the 3W LED lamp illumination effect is obviously better than the 35W halogen lamp, mainly because of the halogen lamp. Not very good use of its luminous flux.
4. Solve the heat dissipation technology of high-power LED lighting fixtures, and delay the light decay of high-power LED lighting fixtures to the utmost extent.
High-power LED lamps are a direction for the future development of the LED lamp industry. At present, due to their high light efficiency and superior lumen maintenance rate, they have become competing products developed by major manufacturers, but high-power LED lamps have higher requirements for heat dissipation technology. When the ambient temperature reaches a certain limit, the light decay will soon occur, which directly leads to the decline of the life of the LED lamp.
Figure: The lifetime of the LED is closely related to the operating temperature, so whether the design of the heat dissipation is excellent is also important, and it is also an effective alternative to the LED and the traditional light source.
Only by solving the heat dissipation technology of high-power LED lamps, and maximally delaying the light decay of LED lamps, it is possible to promote the application of high-power LED lamps in a large area.
At this stage, LED lighting fixtures can be used in many places instead of traditional light sources, especially the emergence of high-power LED lighting fixtures, which accelerates the speed of LED lighting fixtures to replace traditional lighting sources, and also enables the use of LED lighting fixtures in large indoor applications. It has become a reality. With the continuous maturity of the entire industry, the development of LED lighting fixtures is deep and vertical, and high-power LED lighting fixtures will have a large range of changes in price and light efficiency.
Emergency LED drivers are designed specifically for light fixtures . These emergency backup drivers regulate the power supplied to the LED fixture the same way normal drivers do , but they operate off of a battery instead of line voltage . Because they operate off a battery the light output isn't as bright as the fixture normally would produce , but it will be just enough in an emergency situations . Most of our emergency LED drivers have a maximum emergency operation time of 120 minutes .
Emergency Inverter Kit,Battery Backup LED Lighting,LED Emergency Light Module
Jiangmen City Pengjiang District Qihui Lighting Electrical Appliances Co., Ltd , https://www.qihuilights.com