The improvement of product quality is inseparable from the standard. But when the standard one fashion can't meet the actual needs, what should we do? The Guangdong Provincial Standardization Institute gives an effective answer with innovative examples. This is to use the principle of benchmarking to establish a benchmark product index, which is a comprehensive product quality evaluation system, to promote product upgrades and standardize industry development. This innovation in the field of standardization has undoubtedly opened up new ideas for quality work. At present, the development of emerging industries and emerging technologies is changing with each passing day, and the contradiction of technical standards is becoming more and more prominent. Under such circumstances, how to promote the healthy development of new technology products through the innovation of working mode is a big problem that needs to be solved by quality inspection workers. Guangdong's “Benchmarking Method” for LED lighting products has set a benchmark for us to solve problems.

The Guangdong Provincial Institute of Standardization closely follows the pace of emerging industries. With the support of the Provincial Science and Technology Department and the LED Lighting Industry, Education and Research Innovation Industry Alliance, the LED lighting product benchmark index has not only realized the dynamic evaluation of the quality of LED street lamps, but also solved them. Industry standards lag behind the contradiction of technological development. According to Xiong Yong, dean of the Guangdong Institute of Standardization, the move will promote the upgrading of technology and standards for the entire LED lighting industry. It will also provide innovative exploration for the research and technical standards of emerging industry technology standards.

The LED lighting industry has become one of the most important emerging strategic industries in Guangdong. Last year, the province's LED lighting industry grew by more than 25%, with more than 2,600 companies and 1.3 million employees. The industry scale has ranked first in the country. However, due to the high-speed updating of LED lighting products technology, on the one hand, the cycle of product standard setting cannot keep up with the speed of technological development, and the phenomenon of lack of standards and lags is formed. While restricting the rapid spread of technological innovation results, it also causes the dilemma of product quality supervision; On the other hand, there are many steps in the development and revision of standards. From the drafting to the release, the implementation period is long. Some indicators even face the situation that the standards are outdated, which makes the users lack the scientific evaluation of the quality of LED street lamps. The market competition is disorderly and the product quality is uneven. , seriously restricting the healthy development of the LED industry.

To this end, the Guangdong Provincial Institute of Standardization, through cooperation with the LED Lighting Industry Alliance, organized and implemented the “Guangdong Province Green Lighting Demonstration City Product Benchmarking Index Research and Implementation” major research project. The core of the project is in the field of LED lighting industry. In view of the insufficient development of LED lighting emerging industry technology and rapid technological advancement, the product indicators with “significant relationship” with the quality of LED lighting products are selected, and the products are measured relative to the benchmark index. Quality, thus establishing an innovative dynamic LED lighting product quality evaluation system, combined with third-party testing and unified platform evaluation, quality, energy efficiency evaluation and positioning of LED lighting products on the market (first from LED street lights) Classification, its testing methods and standards will be dynamically updated according to the latest published standards and technical methods at home and abroad.

It is reported that the application of the benchmark index in the quality inspection of LED lighting products is conducive to abandon the dispute and solve the common problems encountered in the current LED lighting product quality supervision, testing technology development and platform integration, breaking through the current development of LED lighting industry. The standards are imperfect, and the detection methods cannot keep up with bottlenecks such as technological development. At the same time, the establishment of dynamically updated product benchmarking index and product standard testing and certification system, which has made breakthroughs in public technology aspects such as standards, certification and testing of LED lighting products, and provided scientific quality assessment system for LED lighting products in green lighting demonstration cities. .

The benchmarking method was first created by Xerox in the late 1970s, and then systematically and standardized by the American Productivity and Quality Center. The basic idea is to extract the "comparability" index from multiple research objects and compare them to determine A scientific evaluation is given to the position of a research object in its population. According to statistics, nearly 90% of the world's top 500 companies have applied benchmarking. The LED lighting product benchmark index promoted by Guangdong is based on the benchmark analysis principle, injecting new content in an innovative way according to the actual development of the industry, testing the LED benchmark products representing the industry's innovative technology level, and calculating the product quality comprehensive evaluation system after calculating the index. The benchmark index of LED lighting products researched by the institute is dynamic and continuous with the development of technology. It is conducive to maintaining the synchronization between standards and R&D technology. It can not only locate the current stage of industrial technology development, but also coordinate disputes. Forming alliance technical standards, and even industry and national standards provide a scientific basis.

Xiong Yong believes that in order to adapt to the development of strategic emerging industries, the benchmarking index research is an innovative exploration of standardization work under current conditions. Through the benchmarking index and benchmarking method, the application of the system in the LED lighting industry will explore new paths and create new experiences for common problems that may be encountered in the fields of technical standards construction, quality assessment, testing and certification of strategic emerging industries. Competitive and orderly market environment provides important technical support

Aluminum PCB

Aluminum PCB Advanced Circuits Specification

Among all Metal core PCBs , Aluminum PCBs is the most common type - the base material consists of aluminum core with standard FR4. It features a thermal clad layer that dissipates heat in a highly efficient manner, while cooling components and increasing the overall performance of the products. Currently, Aluminum Backed PCBs is regarded as the solution to high power and tight tolerance applications.

Our full feature aluminum circuit boards making capabilities and value-added options including Free DFM Check allow you to get high-quality aluminum PCBs done within budget. Aluminum PCBs printed by us are widely used for LED lighting, power equipment and automotive systems.

Check our Aluminum core PCB manufacturing capabilities in the following table:

 aluminum PCB Prototype | Aluminium Core PCB | LED PCB | aluminum clad pcb | Aluminum Circuit Board |Al Base board | Al Base PCB

About Us:

BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volume.

Why Us?

UL (E492586), ISO9001,  ISO14001, TS16949, RoHS certified.
Turnover USD 10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 16 layers.
Special Material:ROGERS, Arlon, Taconic.etc.
Client:Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.

Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):

Factory Tour:

Exhibition:

We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.

Delivery:

BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.

FAQ:

Q1: What does BentePCB need for a customized PCB order?
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.
Q5: How about the service BentePCB offered to the customers?
A: If you have any questions about our products or company, do not hesitate to send us your inquiry to our customer service representatives, Your satisfaction is our pursuits.

We don`t just sell PCBs .We sell sleep.

Aluminum PCB

Aluminum PCB, Aluminium Core PCB, Aluminum Base PCB, Aluminum Circuit Board

Shenzhen Bente Circuit Limited , http://www.bentegroup.com