Industry policy hopes landing robot development is expected to enter the fast lane
At the 2016 International Robotics Testing and Certification Summit Forum, Jin Shubo pointed out that the current society’s development of robots continues unabated. According to the data of the National Bureau of Statistics, China’s industrial robot production in 2015 was 32,996 units, an increase of 21.7% year-on-year; it continued from January to September this year. Maintaining rapid growth, the output reached 50,900 units, an increase of 30.8% year-on-year, and about 9 percentage points higher than the annual growth rate of the previous year. The average annual growth rate will be much higher than the national industrial and equipment manufacturing growth rate. However, at the same time of rapid development, there are still many new problems and new trends in China's robotics industry. First, although key components of robots have made breakthroughs, high-end products still rely on imports. Second, some of their own branded products are close to the world's advanced level, but their capacity for independent innovation needs to be strengthened. Third, rapid development of robotics industry in all regions, but low level of repeated construction Appearance; Fourth, the emergence of domestic leading enterprises, but the "small, scattered, weak" issue has not yet fundamentally changed; Fifth, third-party testing agencies have been established, but robot standards, testing and certification systems still need to be improved.
Jin Shubo emphasized that the Ministry of Industry and Information Technology will work together with relevant departments to promote the scientific, healthy and sustainable development of China's robotics industry. The first is to publish "Several Opinions on Promoting the Healthy Development of the Robot Industry" and guide local governments to rationally develop the robot industry; The second is to speed up the development of leading enterprises; the third is to accelerate the establishment of a national robot innovation center; the fourth is to establish and improve standards and certification systems; the fifth is to strengthen the cultivation of talented people, especially high-skilled personnel; and the sixth is to research and formulate the “industrial robot industry regulatory conditionsâ€. Set up accurate implementation platforms for various departments.
Coincidentally, at the second press conference of the 2016 World Robotics Congress, Deputy Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Mr. Ruan Guochun, said in response to a reporter’s question that the development plan of the robot industry is an overall framework and the next step will be to implement various fields. The relevant policies and guidance in the sub-sector will have corresponding plans for how to implement the "two breakthroughs." There will be relevant policies on the quality and reliability of the robots, and it is expected that some corresponding policies will be issued later this year.
In April this year, the Ministry of Industry and Information Technology, the National Development and Reform Commission, and the Ministry of Finance stated in the notice issued on the “Robotic Industry Development Plan (2016-2020)†that “two breakthroughs†and “three upgrades†were focused during the “Thirteenth Five-Year Plan†period. , that is, to achieve a major breakthrough in key parts and high-end products for robots, achieve a significant increase in the quality and reliability of robots, market share, and competitiveness of leading enterprises. With enterprises as the mainstay, collaborative innovation in production, learning, and research is used to create the competitiveness of the entire industrial chain of robots. The formation of a robot industry system with Chinese characteristics.
In addition, according to previous media reports, the next step the country will introduce some specific measures to support the real strength of good companies to implement M & A, external cooperation. From the perspective of the Ministry of Industry and Information Technology, there will also be more specific guidance for the development of key regions and strengthen the construction of the park and the guidance for the development of the enterprise. “Policies are all auxiliary, aiming to create a good environment and guidance. The development of the industry still has to be handed over to the market.†According to a survey conducted by the China Robotics Industry Alliance, there are currently more than 800 large and small-sized robotic companies across the country, and 42 in all areas under construction. There are 77 local support policies issued. The “scattered†industry status has become an important factor hindering the development of the robot industry to high-end and internationalization.
0.4"~0.95" speaker (10~24mm)
1)0.4" speaker 10mm speaker
2)0.5" speaker 13mm speaker
3)0.6" speaker 15mm speaker
4)0.7" speaker 18mm speaker
5)0.8" speaker 20mm speaker
6)0.9" speaker 23mm speaker
7)0.95" speaker 24mm speaker
FAQ
Q1. What is the MOQ?
XDEC: 2000pcs for one model.
Q2. What is the delivery lead time?
XDEC: 15 days for normal orders, 10 days for urgent orders.
Q3. What are the payment methods?
XDEC: T/T, PayPal, Western Union, Money Gram.
Q4. Can you offer samples for testing?
XDEC: Yes, we offer free samples.
Q5. How soon can you send samples?
XDEC: We can send samples in 3-5 days.
0.4" Speaker 10Mm Speaker,0.5" Speaker 13Mm Speaker,0.6" Speaker 15Mm Speaker,High Speaker
Shenzhen Xuanda Electronics Co., Ltd. , https://www.xdecspeaker.com