At the scene of Shanghai International LED Street Lights, Garden Lights and LED Lighting Exhibition, BYD Lighting continuously conveyed to the scene the LED health lighting concept, attracting many visitors to consult on the advanced technology and advantages of BYD LED, and also attracted the central A number of media including TV stations reported on the report.
On September 15, 2010, the electrical appliance sales company continued to bring LED lighting products into Shanghai, and attended the 2010 Shanghai International LED Street Light, Garden Light and LED Lighting Exhibition. This is the third time that the electrical sales company participated in the professional lighting of the LED industry this month. exhibition. The 225-square-meter booth is still the largest in the audience. While reflecting the leader of BYD Lighting's LED healthy low-carbon lighting, it also demonstrates BYD Lighting's determination and confidence in developing a healthy low-carbon lighting industry. Compared with the previous Suzhou and Tianjin lighting exhibitions, Shanghai International LED Lighting Exhibition has attracted domestic distributors and professionals, and attracted more and more people from overseas countries to visit. On the first day of the exhibition, more than 20 dealers at home and abroad came to the dealers. BYD Lighting VIP Negotiation Room negotiates business.
On the first day of the exhibition, BYD Lighting sold more than 40 GL-04W products at a price of 99 yuan per piece.
BYD Lighting booth attracted many visitors to stop, the popularity is the most popular
Vice President of China Municipal Engineering Association and other relevant leaders visited BYD Lighting booth
Application programs are normally developed in the CPU`s RAM memory and executed from RAM memory. If additional program integrity is desired, or operation of the PLC without a battery is desired, an optional EEPROM or EPROM can be installed in a spare socket (labeled PROGRAM PROM) on the Model 311/313 backplane or in a socket on the model 331/341 CPU Module. EEPROMs can be written to and read from. EPROMs can be read when installed in the PLC; however, they must be written to using an external PROM programming device. Following is the procedure for adding or changing the EEPROM or EPROM. For clarity, the term PROM is used to refer to either an EEPROM or an EPROM. 1. Remove power from the system. 2. If 311/313 Remove all modules, including the power supply. Remove the plastic cover. 3. If 331/341: Remove CPU from backplane. Remove front plate and bezel. Unsnap circuit board and remove from case. 4. If the socket is the type which has a screw near the top edge (some versions of 311/331), loosen screw at top of PROM socket (CCW twist;). 5. If present, remove old PROM from socket. Replace with or install new PROM. Orient the PROM so the end with a notch (the top of the prom) is toward the top edge of the backplane. Pin 1 of the prom is the first pin on the left as you move counter–clockwise from the notch. On the 311/331, correct installation orients the notch toward the screw.
Ge Plc 90-30 Cpu Parts,Rack Adaptor Bracket,Ge Automation Controls,Ge Input Simulator Module
Xiamen The Anaswers Trade Co,.LTD , http://www.answersplc.com