Lynx Box 1 brush machine died, can not double the ultimate crack tutorial

The basic situation: My Box 1 was originally exchanged for gold coins. It took a few years to feel good, but there have been several problems in the last year.
The box suddenly crashed, and then it would not boot, brushing third-party rom (my foxrom2.0) is always stuck in three-quarters of the place, Shuangqing will get stuck.
This problem has occurred three times. After the crash of the previous few days, it was originally intended to be abandoned. But after watching Xiaomi's request, it was a little bit expensive, and after a while, the result was accidentally corrected again. Now.
A group of friends came tonight and asked me how I got it. After I told him the method, he successfully saved the box.
So I went to the forum to share the steps of success with friends and I have the same situation. There is no guarantee that everyone will succeed, but I have succeeded with a group of friends according to this method.
I was stuck here when I was a flashing machine.

The solution steps are as follows:
1. First brush back to the official 1.7 version, firmware package (http://pan.baidu.com/s/1c2E74v2 password: hedh), some inside the forum. Attention must be brushed into the official, must show complete before proceeding to the second step.
2. Restart the computer to see if it can return to the following picture. If it is not the official package, it will not be brushed in.
3. Pull the power, grab the small eyes behind the box, plug in the power, enter the official box of the box, then the box should be automatically cleared data. As shown below:
Solve the magic box 1 brush machine stuck, can not double clear.
4. Wait for the box to be cleared. Normally follow the short-circuit method.
Brush tutorial: http://AW3W3T48Wlpu3HJ.html
5. Under normal circumstances you should be able to save your life. If you do not make more than a few recommendations, I do not guarantee that you will succeed. This is just my experience sharing.

I am using this recovery, there is a need to download it and try it out.
download link: Recovery.zip

7 IN 1 USB HUB

Dock Station Type C,7-Port USB Charging Station Dock,7-Port Charging Station,Type C USB HUB,7 in 1 USB HUB C Docking Station

Shenzhen Konchang Electronic Technology Co.,Ltd , https://www.konchang.com