How is Seamount Q5 firmware upgraded? Below we will provide Haimeidi Q5 firmware download and upgrade methods. Interested friends can look down.
There are two ways to upgrade Haimeidi Q5 firmware, as follows:
1, from the system settings - system upgrade, select the USB drive upgrade (usually SDA, SDB)
2. Through the restore key (in the small hole) of Sea Medio Q5, force the box into the upgrade process and upgrade it;
Haimeidi Q5 (1.1.1) firmware download address: http://v.himedia-tech.cn/Q5/111/update.zip
Version 1.1.6 download: http://pan.baidu.com/share/link?shareid=2012361717&uk=755259907
Version 1.1.7 download: http://pan.baidu.com/share/link?shareid=2024049190&uk=755259907
U disk upgrade
1. Copy the prepared upgrade file (each product is different) to the USB root directory;
2. Remove other peripherals (such as USB hard disks, cards) on the Q Series box and plug in the USB with the upgrade file;
3, boot Q series box, system settings - system upgrade, select USB drive upgrade;
4, the box will automatically restart to enter, over 15s, will enter the robot screen;
5, robot picture, there is no progress bar status, indicating that it is initializing and preparing for the upgrade;
6, the robot screen, the state of the progress bar below, said it is upgrading;
Note: The above method is suitable for novice users.
Forced upgrade
1. Copy the prepared upgrade file to the USB root directory;
2. Remove other peripherals (such as USB hard disk, card) on the Haimeidi Q5 box and plug in the USB with the upgrade file;
3, with a pen or needle, press the key in the RESTORE hole, and then power on, release it after 5 seconds (or more) after power on;
4, the box will be forced into the upgrade screen, the screen will appear the robot screen;
5, robot picture, there is no progress bar status, indicating that it is initializing and preparing for the upgrade;
6, the robot screen, the state of the progress bar below, said it is upgrading;
Note: When the U disk can not enter the machine screen to upgrade, the mandatory brush will be your choice.
The processing method that cannot be upgraded 1. Check the preparation status of the upgrade file again, and confirm that the upgrade file has been added to the root directory.
2. The name of the upgrade file for each product is different. Please reconfirm it.
3. The zip file downloaded from Haimeidi official website is the upgrade file, please do not unzip it;
4. Please re-format the USB flash drive and then upgrade it again.
5. Remove other peripheral storage devices on the Q series box;
6. If the forced upgrade is unsuccessful, make sure to hold down the RESTORE key before turning on the computer, and then turn it on. At least 5 seconds of keystrokes are retained after power-on.
7, change the brand U disk to try again;
Failure of upgrade due to power failure during the upgrade process
1. Except for the 1.0.2 version of Q5, after other products have failed to be upgraded due to the official release of Haimei Di, they can continue to upgrade in accordance with the "forced upgrade" method;
2. If you are upgrading the 1.0.2 version of Q5, if the upgrade fails, try to use the "forced upgrade" method to re-upgrade. If you can enter the upgrade robot, you can certainly repair;
3. If the upgrade is the 1.0.2 version of Q5, if the upgrade fails, use the "forced upgrade" method to re-upgrade, and if you cannot enter the upgrade robot page, please contact customer service;
There are two ways to upgrade Haimeidi Q5 firmware, as follows:
1, from the system settings - system upgrade, select the USB drive upgrade (usually SDA, SDB)
2. Through the restore key (in the small hole) of Sea Medio Q5, force the box into the upgrade process and upgrade it;
Haimeidi Q5 (1.1.1) firmware download address: http://v.himedia-tech.cn/Q5/111/update.zip
Version 1.1.6 download: http://pan.baidu.com/share/link?shareid=2012361717&uk=755259907
Version 1.1.7 download: http://pan.baidu.com/share/link?shareid=2024049190&uk=755259907
U disk upgrade
1. Copy the prepared upgrade file (each product is different) to the USB root directory;
2. Remove other peripherals (such as USB hard disks, cards) on the Q Series box and plug in the USB with the upgrade file;
3, boot Q series box, system settings - system upgrade, select USB drive upgrade;
4, the box will automatically restart to enter, over 15s, will enter the robot screen;
5, robot picture, there is no progress bar status, indicating that it is initializing and preparing for the upgrade;
6, the robot screen, the state of the progress bar below, said it is upgrading;
Note: The above method is suitable for novice users.
Forced upgrade
1. Copy the prepared upgrade file to the USB root directory;
2. Remove other peripherals (such as USB hard disk, card) on the Haimeidi Q5 box and plug in the USB with the upgrade file;
3, with a pen or needle, press the key in the RESTORE hole, and then power on, release it after 5 seconds (or more) after power on;
4, the box will be forced into the upgrade screen, the screen will appear the robot screen;
5, robot picture, there is no progress bar status, indicating that it is initializing and preparing for the upgrade;
6, the robot screen, the state of the progress bar below, said it is upgrading;
Note: When the U disk can not enter the machine screen to upgrade, the mandatory brush will be your choice.
The processing method that cannot be upgraded 1. Check the preparation status of the upgrade file again, and confirm that the upgrade file has been added to the root directory.
2. The name of the upgrade file for each product is different. Please reconfirm it.
3. The zip file downloaded from Haimeidi official website is the upgrade file, please do not unzip it;
4. Please re-format the USB flash drive and then upgrade it again.
5. Remove other peripheral storage devices on the Q series box;
6. If the forced upgrade is unsuccessful, make sure to hold down the RESTORE key before turning on the computer, and then turn it on. At least 5 seconds of keystrokes are retained after power-on.
7, change the brand U disk to try again;
Failure of upgrade due to power failure during the upgrade process
1. Except for the 1.0.2 version of Q5, after other products have failed to be upgraded due to the official release of Haimei Di, they can continue to upgrade in accordance with the "forced upgrade" method;
2. If you are upgrading the 1.0.2 version of Q5, if the upgrade fails, try to use the "forced upgrade" method to re-upgrade. If you can enter the upgrade robot, you can certainly repair;
3. If the upgrade is the 1.0.2 version of Q5, if the upgrade fails, use the "forced upgrade" method to re-upgrade, and if you cannot enter the upgrade robot page, please contact customer service;