Foreword:
Jia Lili K80 is a 1G mobile storage +8G flash memory A31S program box, before the flagship store to do activities 269 buy one get one, praise back to 10, the actual price of 129.5 yuan, the price is still relatively high!
Another K62 flash memory is also 8G, transport only 512M, is also A31S program, flagship store to sell 109, praise back to 10, the actual price of 99 yuan, cost is also okay, than the stone T2 kind! But the biggest drawback is that neither of these machines supports an external SD card, which also allows limited space to install more large games...
The two machines have been playing for a while in our A31S program player group. The corresponding Android DIY firmware has also been released for a long time. This time, it is publicly released in this forum!
Brush tool download link: http://pan.baidu.com/s/1mhcEqtM password: sd92
Firmware features:
1, the full Android 4.42
2, has obtained ROOT authority
3, correct USB port identification
4, native remote control support
5, support AV video output
6, support USB plug and play
7, corrected North Pass small handle key
8, integrated mainstream "strengthening" video software
Firmware download:
k80-Andriod-4.42-Dehepo 20141031
Link: http://pan.baidu.com/s/1gekVXQF
Password: 1xzu
k62-Andriod-4.42-Dehepo 2014111
Link: http://pan.baidu.com/s/1mhidW3A
Password: e3i4
Brush tutorial (different types of different ways to start a strong brush, see note)
note:
The tutorial about the installation of the brush software, driving and use of the basic universal A31S program universal, the only difference is that the way to start a strong brush after installing the brush software is different
K80 start strong brush:
1, load the firmware after loading the firmware
2, turn off the power button
3, connect the USB cable (connect the USB port near the LAN port on the box)
4, withstand the uboot button on the back of the set-top box (this is more hidden, the back of the machine has two small round holes on the left, from the bottom of a round hole will see the motherboard has two buttons, right below the hole is the corresponding rec key , And the next one is the uboot key, which can be topped with a toothpick inserted obliquely from the strip seam.)
5, turn on the power
6, the computer detected the hardware, corresponding to the above tutorial to complete the driver installation and brush machine
K62 start strong brush:
1, load the firmware after loading the firmware
2, connect the machine's power and boot (this must be noted, to completely boot)
3, After the indicator light turns blue, press the power on the machine, the machine enters standby state, the indicator light turns red.
4, long press the power button on the machine for 5-10 seconds, the indicator will change from red to blue
5, plug the USB into the computer (connect the USB port near the LAN port on the box)
After the completion of the brush machine recommended to install a sofa butler, you can download free live, on demand, games and other applications, sofa butler official download address:
Alps Tact Switch,Navigation Use Switch,Square Thin Surface Switch,Surface Mount Push Button Switch
DA CHENG MINGHUA LIMITED , https://www.alpsswitch.com