Micro computer control system,PT100 sensor,digital display
Inner cabinet temperature range in 4±1ºC,temperature display accuracy of ± 0.1ºC
Force air flow designing.
Safety Functions :
Digital display for temperature
Light and Sound alarms for high-low temperature,power failure,system failure and door open
Time-delay prevention for starting up in case of off-limits currency rushing
Safe running mode when in trouble
Auto defrost
Cooling System :
Famous branded compressor,non-CFC environmental high efficiency refrigerant
Using excellent high efficient evaporator and condensation of Germany EBM company
Excellent cooling system design
Thickness mono-assembly foaming thermal raw materials.
Humanized Designing :
Three layer transparent glass door with safety lock and key design
Stainless steel inner wall,cold rolled steel with anti-bacterial powder coating
Using Vacuum Insulation Panel(VIP) to keep the better thermal effect
Wide range of voltage design,range from 198~242 volts
LED digital display,convenient to watch
Interior fluorescent light
Adjustable shelves and baskets made by steel wire with plastic powder or stainless steel shelves(Optional),convenient and practical;easy to clean.
Blood Type(A,AB,O) can be marked for different storage floor.
Universal caster with locking function style.
Back-up battery inside extend up to 48 & 72hours in case of power failure (optional).
Temperature recorder and thermal printer are optional items.Â
Main Technical Parameters :
| Model | Volume | External Size/W*D*H | Voltage | Power | Temp | Climate | N.W. |
| HEPO-B828 | 828L | 1200*740*1920mm | 220v/50hz | 420 | 4±1ºC | N | 114kgs |
| HEPO-B1000 | 1000L | 1200*750*1965mm | 220v/50hz | 850 | 4±1ºC | N | 160kgs |
| HEPO-B1500 | 1500L | 1800*750*1965mm | 220v/50hz | 1100 | 4±1ºC | N | 190kgs |
A small safety part in an automobile electrical device or piece of machinery that causes it to stop working if the electric current is too high, and so prevents fires or other dangers. Fuse, also known as current fuse, is defined by the IEC127 standard as "fuse-link". It is mainly an overload protection. If the fuse is properly installed in the circuit, the fuse will cut off the current and protect the circuit safe operation when the current abnormal is raised to a certain height and heat. Invented by Edison fuse is used to protect more than one hundred years ago when the expensive incandescent bulbs, along with the development of The Times, the fuse protection power equipment is not trained in current overheat damage, avoid electronic equipment serious damage caused by internal fault. When a circuit breaks down or is abnormal, the current increases with the current and the increased current may damage some important components in the circuit, and it may also burn the circuit and even cause a fire. If correctly placed in the circuit fuse, the fuse will be abnormal current increases to a certain height and heat, its own fuse to cut off the current, so as to protect the safe operation of the circuit.
Auto Fuses
Auto Fuses,Thermal Fuse,Temperature Fuse,Auto Glass Tube Fuse
Heshan Jianhao Lighting Industrial Co., Ltd. , http://www.sunclubtw.com